Woah, this is a default personal text! Edit your profile to change this to what you like!
Deleted
|
Post by Deleted on Mar 25, 2017 7:24:47 GMT -5
To take it fully apart?
NONE.
|
|
Woah, this is a default personal text! Edit your profile to change this to what you like!
Deleted
|
Post by Deleted on Mar 25, 2017 9:03:55 GMT -5
Depends what you mean by fully.
|
|
Woah, this is a default personal text! Edit your profile to change this to what you like!
Deleted
|
Post by Deleted on Mar 25, 2017 13:41:11 GMT -5
Depends what you mean by fully. I mean fully............. every piece down to the bare frame, except for the plunger tube and ejector, which are not normally removed anyway.
Zero tools required.
|
|
Woah, this is a default personal text! Edit your profile to change this to what you like!
Deleted
|
Post by Deleted on Mar 25, 2017 23:48:29 GMT -5
Depends what you mean by fully. I mean fully............. every piece down to the bare frame, except for the plunger tube and ejector, which are not normally removed anyway.
Zero tools required.
YOU SAID FULLY.
|
|
Woah, this is a default personal text! Edit your profile to change this to what you like!
Deleted
|
Post by Deleted on Mar 26, 2017 1:54:32 GMT -5
I mean fully............. every piece down to the bare frame, except for the plunger tube and ejector, which are not normally removed anyway.
Zero tools required.
YOU SAID FULLY. That is fully. I mean every single moving part conatined inside the frame or inside the slide. EVERY MOVING PART. The plunger tube and ejector are not moving parts, and are considered more integral to the frame. Anyway, it's obvious you don't know how to do it. You've even had 18 hours to google the answer, and it's not a secret. It's well known to people who understood the John M. wanted his handgun to be totally serviceable in the field, without being dependent on a tool kit.
Here's your first clue. If a certain operation is a bit too tough, you can start with the pistol's magazine.
You're sounding like Trn now. Instead of admitting you are clueless, you are trying to go off on a tangent that is irrelevant.
|
|
Woah, this is a default personal text! Edit your profile to change this to what you like!
Deleted
|
Post by Deleted on Mar 26, 2017 1:57:45 GMT -5
That is fully. I mean every single moving part conatined inside the frame or inside the slide. EVERY MOVING PART. The plunger tube and ejector are not moving parts, and are considered more integral to the frame. YOU SAID FULLY. Anyway, it's obvious you don't know how to do it. You've even had 18 hours to google the answer, and it's not a secret. It's well known to people who understood the John M. wanted his handgun to be totally serviceable in the field, without being dependent on a tool kit.
Here's your first clue. If a certain operation is a bit too tough, you can start with the pistol's magazine.
|
|
Woah, this is a default personal text! Edit your profile to change this to what you like!
Deleted
|
Post by Deleted on Mar 26, 2017 1:58:45 GMT -5
That is fully. I mean every single moving part conatined inside the frame or inside the slide. EVERY MOVING PART. The plunger tube and ejector are not moving parts, and are considered more integral to the frame. YOU SAID FULLY. Anyway, it's obvious you don't know how to do it. You've even had 18 hours to google the answer, and it's not a secret. It's well known to people who understood the John M. wanted his handgun to be totally serviceable in the field, without being dependent on a tool kit.
Here's your first clue. If a certain operation is a bit too tough, you can start with the pistol's magazine.
You're sounding like Trn now. Instead of admitting you are clueless, you are trying to go off on a tangent that is irrelevant.
|
|
Woah, this is a default personal text! Edit your profile to change this to what you like!
Deleted
|
Post by Deleted on Mar 26, 2017 2:01:54 GMT -5
You're sounding like Trn now. Instead of admitting you are clueless, you are trying to go off on a tangent that is irrelevant.
FULLY means every single part separated into separate parts, not YOUR version of fully. Trn was right about you.
|
|
Woah, this is a default personal text! Edit your profile to change this to what you like!
Deleted
|
Post by Deleted on Mar 26, 2017 2:07:40 GMT -5
You're sounding like Trn now. Instead of admitting you are clueless, you are trying to go off on a tangent that is irrelevant.
FULLY means every single part separated into separate parts, not YOUR version of fully. Trn was right about you. So you admit you don't even know how to get started. Come on, give it a shot. Let''s see how much you know. If you can get it down to only the plunger tube and ejector left, THEN we'll see about tackling those 2 parts, too.
Are you gonna play or not?
|
|
Woah, this is a default personal text! Edit your profile to change this to what you like!
Deleted
|
Post by Deleted on Mar 26, 2017 2:14:35 GMT -5
FULLY means every single part separated into separate parts, not YOUR version of fully. Trn was right about you. So you admit you don't even know how to get started. Come on, give it a shot. Let''s see how much you know. If you can get it down to only the plunger tube and ejector left, THEN we'll see about tackling those 2 parts, too.
Are you gonna play or not?FULLY. You said it and now you backpeddle like a girlie boy. Ha!
|
|
Woah, this is a default personal text! Edit your profile to change this to what you like!
Deleted
|
Post by Deleted on Mar 26, 2017 2:23:52 GMT -5
So you admit you don't even know how to get started. Come on, give it a shot. Let''s see how much you know. If you can get it down to only the plunger tube and ejector left, THEN we'll see about tackling those 2 parts, too.
Are you gonna play or not? FULLY. You said it and now you backpeddle like a girlie boy. Ha! Thank you for admitting you have no idea to take down a 1911 without tools. Instead you get into a pissing contest about the only 2 non-moving parts on the gun, thast are NEVER removed unless they break. They do not need to be removed for full cleaning or maintenance. I'll give you one more chance. Do you even know which end of the gun to start working on FIRST? And you claim you can build a gun? LMAO. You couldn't build a wall of dominoes.
I'm going to bed. You can sleep on it and give me an answer in the morning, Meatloaf meathead.
|
|
Woah, this is a default personal text! Edit your profile to change this to what you like!
Deleted
|
Post by Deleted on Mar 26, 2017 2:27:01 GMT -5
"They do not need to be removed for full cleaning or maintenance." Is that "fully"? And do you get to define "fully" or do I?
|
|
Woah, this is a default personal text! Edit your profile to change this to what you like!
Deleted
|
Post by Deleted on Mar 26, 2017 8:29:44 GMT -5
"They do not need to be removed for full cleaning or maintenance."Is that "fully"? And do you get to define "fully" or do I? Are you going to tell the class how to disassemble a 1911 with no tools, or are you going to keep playing the TRN BULLSHIT game? Just admit you are clueless and let's move on.
Or you can take it as far as you can, and then admit defeat. Just take the gun apart until you can't go any further, how about that?
|
|
Woah, this is a default personal text! Edit your profile to change this to what you like!
Deleted
|
Post by Deleted on Mar 26, 2017 10:43:59 GMT -5
To take it fully apart?
NONE. Here's your claim again. This is about you, not me so stop trying to backpeddle girlie boy. You lose, Trn and I win. Have a nice day!
|
|
Woah, this is a default personal text! Edit your profile to change this to what you like!
Deleted
|
Post by Deleted on Mar 26, 2017 11:30:34 GMT -5
To take it fully apart?
NONE. Here's your claim again. This is about you, not me so stop trying to backpeddle girlie boy. You lose, Trn and I win. Have a nice day! OK, let me rephrase the question for people who don't know anything about Colt 1911's and their clones ........... How many tools are required to strip a 1911 of all its parts except the plunger tube, ejector, and grip screw bushings, which are normally NEVER changed out? NOW can you answer the question? Come on son, I'm giving you every chance in the world.
Here's a hint: John Browning designed the 1911's grip screws with concave screwdriver slots in them instead of conventional flat bottomed slots for a good reason.
|
|